Our transfers are capable of pressing to cotton, silk, polyester, denim and much more. Our transfers work on both white and dark garments. All you need is a heat press and the garment or substrate.

All prints are printed without commercial grade printer using double side frosted film with the high quality inks, hot melt powder and RIP software.

Please note that colours may appear different on screen compared to the final printed product due to variations in monitor settings, lighting, and printing processes.

DESIGN BOARD MEASUREMENTS
30CM X 100CM

Please upload a high-resolution 300dpi PNG with transparent background to our online designer. We do not take responsibility for the print quality if images lower than 300dpi are uploaded.

DO NOT mirror your artwork, we will do this before printing.

Pressing Instructions:

Heat Press is REQUIRED
Preheat garment to remove excess moisture
Place your artwork directly onto the garment, uncovered (if your heat press runs hot use a teflon sheet over the top of the print)
Press for 15 seconds
Best to wait and peel COLD.
Press a second time for additional 15 seconds at the same temperature, covering with either the film peeled off, teflon sheet or baking paper. Pressing the second time cures the print into the garment.
Wait 24 hours before washing or stretching.
Temperature: 130-150 degrees. Start at a lower temp and adjust as necessary.
Pressure: Medium

1 METRE CUSTOM DTF PRINT