PRODUCT DETAILS
UV DTF TRANSFER - SINGLE IMAGE
Suitable for 16oz libbey glass cans - printed approximately 12cm x 9.5cm
- Premium UV DTF Transfers
- Waterproof & Permanent
- No weeding
- No layering
- Receive ready to peel n stick
Please note: while the transfers are waterproof, I recommend that you do not run the libbey glass through the dishwasher once the wrap is applied. Hand wash ONLY!
How to apply
1. Peel transfer off the backing sheet
2. Place the transfer on the cup (make sure the design is straight and positioned correctly).
3. Press the transfer down, pushing out any air bubbles(if you can't push all the air bubbles out, use a pin to put a tiny pin prick than push the air bubbles out)
4. Rub all over the design with your fingers or silicone squeegee.
5. Peel clear film off against it's self (please do not rip the transfer tape off. Be patient and do it slowly to ensure the transfer is applied properly).
The adhesive is extremely strong!!! Once the transfer touches the substrate it's almost impossible to remove. Please be careful when apply.